OPTIGN-007 OPTIFIT IGNITE OUTDOOR VARIABLE LOAD GLUTE KICKBACK

Product Specification

Variable Load System:

The variable load system on our Ignite outdoor strength equipment allows users to vary the weight they lift by simply pulling a sprung loaded plunger and sliding the weight along the length of the stainless steel rail to vary the load on each side of the equipment and the plunger locks the weights in place. Starting weight is zero plus the weight of the lifting, pressing or pulling arm.

Standard Weight Load: 

• Up to 30kg on each side (Using 2.5kg 5kg or 10kg plates)
• Providing exercise loading of 5kg - 60kg

Weights & Dimensions: 

• Length: 1112mm 
• Width: 1270mm
• Height: 1422mm
• Weight: 155kg

Recommended Safe Area:

• L 4112mm x W 4271mm

Muscles Used:

Works your legs and hips, specifically the gluteals and hamstrings.

Instructions for Use:

• Adjust weights on both sides of the equipment by pulling plunger and sliding the weight sled along the length of the rail.
• Standing inside the machine, lean slightly forward and place both hands on the handrail. Then place one foot on the rear foot pedal. 
• Slowly straighten the rear leg by pushing against the foot pedal, without locking out the knee at the end of the movement.
• Repeat for the required repetitions and repeat with the other leg.

User Notice:

• Obtain advice from your doctor before undertaking any form of physical exercise.
• Maximum User Weight: 150kg.
• Equipment is to be used for its intended purpose and by one user only.
• Suitable for users with an overall height greater than 140cm.